 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC100EPT22 Dual LVTTL/LVCMOS to Differential LVPECL Translator The MC100EPT22 is a dual LVTTL/LVCMOS to differential LVPECL translator. Because LVPECL (Positive ECL) levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package and the single gate of the EPT22 makes it ideal for those applications where space, performance, and low power are at a premium. Because the mature MOSAIC 5 process is used, low cost and high speed can be added to the list of features. http://onsemi.com * * * * * * * * * * * 420ps Typical Propagation Delay Differential LVPECL Outputs Small Outline SOIC Package PNP LVTTL Inputs for Minimal Loading Flow Through Pinouts Q Output will default HIGH with inputs open ESD Protection: 4.0 KV HBM, 200 V MM Maximum Frequency > 1.1 GHz Moisture Sensitivity Level 1, Indefinite Time Out of Drypack. For Additional Information, See Application Note AND8003/D Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 164 devices 8 1 SO-8 D SUFFIX CASE 751 MARKING DIAGRAM 8 KPT22 ALYW 1 *For additional information, see Application Note AND8002/D A L Y W = Assembly Location = Wafer Lot = Year = Work Week Q0 1 8 VCC PIN DESCRIPTION PIN Q0, Q1, Q0, Q1 FUNCTION Diff. LVPECL Outputs LVTTL Inputs Positive Supply Ground Q0 2 LVPECL LVTTL 7 D0 D0, D1 VCC GND Q1 3 6 D1 Q1 4 5 GND ORDERING INFORMATION Device Package SOIC SOIC Shipping 98 Units/Rail 2500 Tape & Reel Figure 1. 8-Lead Pinout (Top View) and Logic Diagram MC100EPT22D MC100EPT22DR2 (c) Semiconductor Components Industries, LLC, 1999 1 September, 1999 - Rev. 2.0 Publication Order Number: MC100EPT22/D MC100EPT22 MAXIMUM RATINGS* Symbol VCC VI Iout TA Tstg JA JC Tsol Power Supply Input Voltage (VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Parameter Value 6.0 to 0 6.0 to 0 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC mA C C C/W C/W C * Maximum Ratings are those values beyond which damage to the device may occur. LVTTL INPUT DC CHARACTERISTICS (VCC = 3.3V 0.3V; GND = 0V; TA = -40C to +85C) Symbol IIH IIHH IIL VIK VIH VIL Input HIGH Current (Vin = 2.7V) Input HIGH Current MAX (Vin = 6.0V) Input LOW Current (Vin = 0.5V) Input Clamp Voltage (Iin = -18mA) Input HIGH Voltage Input LOW Voltage 2.0 0.8 Characteristic Min Typ Max 20 100 -0.6 -1.0 Unit A A mA V V V LVPECL OUTPUT DC CHARACTERISTICS (VCC = 3.3V 0.3V, GND = 0V) (Note 3.) -40C Symbol ICC VOH VOL Characteristic Power Supply Current HIGH (Note 1.) Output HIGH Voltage (Note 2.) Output LOW Voltage (Note 2.) Min 32 2100 1350 Typ 43 2240 1490 Max 55 2400 1600 Min 35 2100 1350 25C Typ 45 2280 1555 Max 60 2400 1600 Min 37 2100 1350 85C Typ 46 2350 1550 Max 62 2400 1600 Unit mA mV mV NOTE: 100EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 1. VCC = 3.3V, GND = 0V, all other pins floating. 2. All loading with 50 ohms to VCC-2.0 volts. 3. Output parameters vary 1:1 with VCC. AC CHARACTERISTICS (VCC = 3.3V 0.3V; GND = 0V) -40C Symbol fmax tPLH, tPHL tJITTER Characteristic Maximum Toggle Frequency (Note 4.) Propagation Delay to Output Differential Cycle-to-Cycle Jitter Min 0.8 250 Typ 1.1 400 TBD 650 Max Min 0.8 250 25C Typ 1.1 420 TBD 220 70 675 Max Min 0.8 300 85C Typ 1.1 500 TBD 140 250 700 Max Unit GHz ps ps ps tr & Output Rise/Fall Times 50 110 200 60 120 tf (20% - 80%) Q, Q 4. Fmax guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. http://onsemi.com 2 MC100EPT22 PACKAGE DIMENSIONS SO-8 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q http://onsemi.com 3 MC100EPT22 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION USA/EUROPE Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line*: 303-675-2167 800-344-3810 Toll Free USA/Canada *To receive a Fax of our publications ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5487-8345 Email: r14153@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. America Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 4 MC100EPT22/D |
Price & Availability of MC100EPT22
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |